TSM007IDT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 116kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TSM007 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 25V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 12V~25V |
| Quiescent Current | 10mA |
| Control Features | Frequency Control, Soft Start |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 66 % |
| Duty Cycle (Max) | 60% |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TSM007IDT Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) can be handled by it. Voltages 12V~25V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a 0°C~95°C TA. Using this switching controller, it is possible to switch at 100kHz. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Frequency Control, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a DUAL terminal on the switching converters. There are many different types of terminations for 8. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. Searching "TSM007" will return other relevant dc to dc converter ics. There are only 8 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. As determined by the test statistics, the output voltage of DC regulator is 25V. It's important to remember that the dc dc regulator's normaloutput current is 100mA, so you should note it down when starting a new project. The duty cycle of the voltage regulator dc to dc can be set to 66 % on power-up or power-down to ensure reliability. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controller operates at a frequency of 116kHz. To operate the voltage regulator dc to dc safely and reliably, users should apply 20V. A total of 1 functions are present in the switch converters. The dc switching utilizes 10mA when it is in a dormant state. There is a design for voltage regulators switching with 8 pins.
TSM007IDT Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 66 %
Frequency: 116kHz
TSM007IDT Applications
There are a lot of STMicroelectronics TSM007IDT DC to DC converter applications.
- Sink circuits
- Grinders
- Handheld GPS
- Geothermal power
- Medical monitoring systems
- Flexible manufacturing cells
- Serial communication converter
- Computer application technology
- Combined machine tools
- Magnetohydrodynamic power
