TSM007IN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~95°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 116kHz |
| Base Part Number | TSM007 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 25V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 12V~25V |
| Quiescent Current | 10mA |
| Control Features | Frequency Control, Soft Start |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 66 % |
| Duty Cycle (Max) | 60% |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TSM007IN Overview
This switching controller fits most application requirements since it is packaged in a 8-DIP (0.300, 7.62mm) package. This dc motor controller can be used to generate outputs with 1 numbers. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. A 12V~25V voltage is supplied to the dc control and used for operating it. Qualified to work in a 0°C~95°C TA dc switcher. The switching controller is capable of switching at the 100kHz position. A generalization of dc dc regulator can be made using Through Hole. For efficient switching control, the dcdc regulator features Frequency Control, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. There are many different types of terminations for 8. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis 12V volts. Other relevant dc to dc converter ics can be found by searching "TSM007". There are only 8 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 25V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 100mA. A duty cycle set at 66 % ensures voltage regulator dc to dc reliability during power-on and power-off. In most applications and prototype designs, DC switcher is qualified as a Through Hole. A frequency of 116kHz is used by the switching controller. It is suggested that users apply 20V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. In total, thare switch converters have 1 functions. A dc switching in a dormant state uses 10mA. Voltage regulators switching is designed with 8 pins.
TSM007IN Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 66 %
Frequency: 116kHz
TSM007IN Applications
There are a lot of STMicroelectronics TSM007IN DC to DC converter applications.
- Scientific research
- Imported equipment
- Serial communication converter
- Automatic testing equipment
- Remotely powered electric motors
- Handheld GPS
- Alternators
- Thermal power
- Smoke exhaust equipment
- Electrical power transmission
