TSM102ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Amplifier, Comparator, Reference |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Power Management |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TSM102 |
| Pin Count | 16 |
| Operating Supply Voltage | 30V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Nominal Supply Current | 1.5mA |
| Output Current | 6mA |
| Slew Rate | 2 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Common Mode Rejection Ratio | 70 dB |
| Input Offset Voltage (Vos) | 4.5mV |
| Bandwidth | 2.1MHz |
| Gain Bandwidth Product | 2.1MHz |
| Unity Gain BW-Nom | 21000 kHz |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 36V |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.1μA |
| Programmable Power | NO |
| Input Bias Current | 200nA |
| Nominal Gain Bandwidth Product | 2.1MHz |
| Max I/O Voltage | 4.5mV |
| Power | NO |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TSM102ID Overview
This product is contained in a Tube package.There is no doubt that this is an excellent Amplifier, Comparator, Reference that is very good value for money.The 16-SOIC (0.154, 3.90mm Width) package was dispatched with this item.Mounting is carried out in the Surface Mount direction of the part.The most common application is in Power Management.The base part number of this device is TSM102.There are two 2 functions here that are used to gain access to high performance for amplification purposes.16 terminals are in total there, which each have their own function that they perform.In order to achieve the maximum relow for the part, the iron temperature should be controlled under 260 during the peak relow procedure.A total of 13 16 pins are present on this part in total.Ideally, a supply voltage of 5V would be recommended for this amplifier to run at its full potential.I have designed this amplifier to cater to your custom needs based on your 16-pin connector.This device is capable of operating at temperatures as low as -40°C.Interestingly, this part can work at a temperature of up to 85°C, which is impressive.I am sure that it will do the same thing as other high-quality Operational Amplifiers, which are capable of a huge amount of amplifying.As a result of combining 2 channels, this video processing device is able to deliver amazing performance.The device can be supplied using 30V.
TSM102ID Features
TSM102ID Applications
There are a lot of Texas Instruments TSM102ID Special Purpose Amplifiers applications.
- Test and measurement instruments
- Medical instruments
- High-frequency data acquisition systems
- Vehicle electronics
- Navigation
- Inverse/same-phase proportional circuit
- Car stereo
- Signal transformation
- Proportional counter tubes
- High input resistance broadband
