TSM108IDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE OR VOLTAGE AND CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Frequency | 100kHz |
| Base Part Number | TSM108 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 80mA |
| Voltage - Supply (Vcc/Vdd) | 9V~32V |
| Max Supply Current | 7mA |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 32V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 95% |
| Length | 8.65mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TSM108IDT Overview
This switching controller fits most application requirements since it is packaged in a 14-SOIC (0.154, 3.90mm Width) package. 1 outputs can be generated with the dc motor controller. Packaged in solid enclosures, this pmic has a Cut Tape (CT) rating. The program can handle Transistor Driver dc switching's outputs (s). DC control operates at 9V~32V volts and has 9V~32V supply voltage. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. A generalization of dc dc regulator can be made using Surface Mount. Enable, Frequency Control provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . 14 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. Other relevant dc to dc converter ics will be returned if you search "TSM108". The switching converter has a total of 14 pins. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 9V. The dc to dc regulator is limited to 32V input voltage. In most cases, the output current of the dc dc regulator will be 80mA, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 100 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. A frequency of 100kHz is set for the switching controller. DC to DC voltage regulator has a value of CAN ALSO BE CONFIGURED IN CURRENT MODE OR VOLTAGE AND CURRENT MODE to better satisfy the need. Components may become damaged if their current exceeds 7mA.
TSM108IDT Features
Transistor Driver Outputs
Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 100kHz
CAN ALSO BE CONFIGURED IN CURRENT MODE OR VOLTAGE AND CURRENT MODE
TSM108IDT Applications
There are a lot of STMicroelectronics TSM108IDT DC to DC converter applications.
- Ball screw pair
- Computer application technology
- Analog precision reference circuits
- Planers
- Scientific testing
- Packaging
- CMM
- Electrical distribution systems
- Scientific research
- Correction machines
