Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Supplier Device Package |
8-SOIC |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2015 |
Series |
TSM91x |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
with Voltage Reference |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Output Type |
Push-Pull |
Operating Supply Voltage |
5.5V |
Number of Elements |
1 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.6V |
Output Current |
50mA |
Propagation Delay |
40 μs |
Quiescent Current |
1.3μA |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Input Offset Voltage (Vos) |
5mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Input Current |
1nA |
Input Bias Current |
1nA |
Current - Quiescent (Max) |
1.3μA |
Voltage - Input Offset (Max) |
5mV |
Current - Input Bias (Max) |
1nA |
Hysteresis |
4mV |
CMRR, PSRR (Typ) |
80dB PSRR |
Current - Output (Typ) |
50mA |
Propagation Delay (Max) |
40μs |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
TSM9117ESA+T Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Push-Pull is being used.This package has been designed with Tape & Reel (TR) .Electronic comparator is possible to classify the chip as with Voltage Reference .There are a total of 1 elements in it.The type of mounting recommended is Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator is equipped with 8 pins.There is a quiescent current of 1.3μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is possible to input up to 1nA current into the device.There is no recommendation for temperatures higher than 85°C .Lower temperatures than -40°C are unsuitable for it.5.5V is the maximum supply voltage of the comparator.This comparator allows minimum supply voltage of 1.6V .1 channels cooperate together to maintain the output quality.Comparator electronics comes from the series of TSM91x comparator parts.For normal operation, the operating supply voltage must be 5.5V .
TSM9117ESA+T Features
Push-Pull output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.3μA
TSM9117ESA+T Applications
There are a lot of Touchstone Semiconductor TSM9117ESA+T linear comparators applications.
- RC Timers
- General-Purpose Portable Devices
- High-Speed Sampling Circuits
- Window Comparators, Multivibrators
- Wide Range VCO; MOS Clock Timers
- Consumer Medical Electronics
- Window Comparators
- Security Detection Systems
- Metering Systems
- Notebooks and PDAs