TSM924CSE+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | TSM92x |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Base Part Number | TSM924 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 4 |
| Output Current | 40mA |
| Propagation Delay | 12 μs |
| Quiescent Current | 6.5μA |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Supply Voltage Limit-Max | 12V |
| Voltage - Input Offset (Max) | 10mV @ 2.5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 12μs |
| Height Seated (Max) | 1.75mm |
| Length | 9.905mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
TSM924CSE+T Overview
In order to facilitate transportation, it is packaged in 16-SOIC (0.154, 3.90mm Width) .There is a CMOS, Push-Pull, TTL output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .There are16 terminals on the comparator.Electronic comparator is a part of Comparator family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.When it comes to types, this comparator is a typical with Voltage Reference .There are a total of 4 elements in it.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator consists of 16 pins.You can find more pin-to-pin solutions for your special requirements by searching TSM924 .There is 6.5μA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.The part is from TSM92x comparator series.
TSM924CSE+T Features
CMOS, Push-Pull, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 6.5μA
TSM924CSE+T Applications
There are a lot of Silicon Labs TSM924CSE+T linear comparators applications.
- Battery-Powered Electronics
- Battery management and protection
- Laptop Computers
- Appliances
- Factory automation & control
- Building automation
- Industrial
- Limit Comparators
- Mobile Communications
- Portable and Battery-Powered Systems
