banner_page

TSM924ESE+T

Surface Mount Cut Tape (CT) 40mA mA Linear Comparators 2015 10mV mV Surface Mount


  • Manufacturer: Touchstone Semiconductor
  • Nocochips NO: 826-TSM924ESE+T
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 962
  • Description: Surface Mount Cut Tape (CT) 40mA mA Linear Comparators 2015 10mV mV Surface Mount (Kg)

Details

Tags

Parameters
Published 2015
Series TSM92x
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type with Voltage Reference
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Output Type CMOS, Push-Pull, TTL
Number of Elements 4
Max Supply Voltage 11V
Min Supply Voltage 2.5V
Output Current 40mA
Propagation Delay 12 μs
Quiescent Current 6.5μA
Common Mode Rejection Ratio 80 dB
Voltage - Supply, Single/Dual (±) 2.5V~11V ±1.25V~5.5V
Input Offset Voltage (Vos) 10mV
Power Supply Rejection Ratio (PSRR) 80dB
Max Dual Supply Voltage 5.5V
Min Dual Supply Voltage 1.25V
Current - Quiescent (Max) 6.5μA
Voltage - Input Offset (Max) 10mV @ 2.5V
CMRR, PSRR (Typ) 80dB CMRR, 80dB PSRR
Current - Output (Typ) 40mA
Propagation Delay (Max) 12μs
RoHS Status RoHS Compliant
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Supplier Device Package 16-SOIC
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)

TSM924ESE+T Overview


Electronic comparator is packaged in 16-SOIC (0.154, 3.90mm Width) for convenient transportation.There is a comparator of type CMOS, Push-Pull, TTL output on this device.This package has been designed with Cut Tape (CT) .Electronic comparator is possible to classify the chip as with Voltage Reference .This element consists of 4 elements in total.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.Electronic comparator has 16 pins.The comparator displays a quiescent current of 6.5μA .The PCB or other board has a Surface Mount for mounting.Temperature higher than 85°C is not recommended.Temperature lower than -40°C is not suitable for the it.11V is the maximum supply voltage of the comparator.A minimum supply voltage of 2.5V is allowed for this comparator.Comparator electronics comes from the series of TSM92x comparator parts.

TSM924ESE+T Features


CMOS, Push-Pull, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 6.5μA

TSM924ESE+T Applications


There are a lot of Touchstone Semiconductor TSM924ESE+T linear comparators applications.

  • Automotive
  • Building automation
  • Metering Systems
  • Infotainment and Clusters
  • System control and monitoring
  • Current and voltage sensing
  • Analog front end
  • Handheld Instruments
  • Threshold Detectors
  • Point of load regulators

Write a review

Note: HTML is not translated!
    Bad           Good