TSM932CSA+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2015 |
| Series | TSM93x |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | TSM932 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 4.5μA |
| Power Dissipation | 471mW |
| Output Current | 40mA |
| Propagation Delay | 12 μs |
| Quiescent Current | 4.5μA |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Voltage - Input Offset (Max) | 10mV @ 2.5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 40mA |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
TSM932CSA+ Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, Push-Pull, TTL .This package has been designed with Tube .The device is designed with 8 terminations.The electrical component here belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.The type of the chip can be classified as with Voltage Reference .This element consists of 2 elements in total.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator is equipped with 8 pins.You can find more pin-to-pin solutions for your special requirements by searching TSM932 .The comparator displays a quiescent current of 4.5μA .Mounting on PCBs or other boards is easy with the Surface Mount .For normal use of the device, the nominal supply current should be 4.5μA .In this case, the part is from the TSM93x comparator series.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
TSM932CSA+ Features
CMOS, Push-Pull, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 4.5μA
TSM932CSA+ Applications
There are a lot of Silicon Labs TSM932CSA+ linear comparators applications.
- Window Comparators, Multivibrators
- Hand-Held Electronics
- Security Detection Systems
- Power Supervision
- Battery management and protection
- Body Control Modules
- Portable and Battery-Powered Systems
- High-Speed Differential Line Receiver
- Analog front end
- Wide Range VCO; MOS Clock Timers
