Parameters |
Terminal Pitch |
0.65mm |
Base Part Number |
TSM932 |
JESD-30 Code |
S-PDSO-G8 |
Output Type |
CMOS, Push-Pull, TTL |
Number of Elements |
2 |
Output Current |
40mA |
Propagation Delay |
12 μs |
Quiescent Current |
4.5μA |
Supply Current-Max |
0.0058mA |
Response Time |
14000 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
2.5V~11V ±1.25V~5.5V |
Input Offset Voltage (Vos) |
10mV |
Voltage - Input Offset (Max) |
10mV @ 2.5V |
Hysteresis |
50mV |
CMRR, PSRR (Typ) |
80dB CMRR, 80dB PSRR |
Propagation Delay (Max) |
12μs |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2015 |
Series |
TSM93x |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
with Voltage Reference |
Subcategory |
Comparator |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
2 |
Supply Voltage |
3V |
TSM932CUA+ Overview
A convenient transport package is provided in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .This comparator is of the CMOS, Push-Pull, TTL output type.Electronic comparator is shipped by Tube .There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.This is a typical comparator of type with Voltage Reference .Electronic comparator has a total of 2 elements.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .Alternatively, you may search for TSM932 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 4.5μA volts.There is a Surface Mount on the board for mounting to a PCB or other board.This part can be supplied with a maimum current of 0.0058mA .A comparator part from the TSM93x series is used in this part.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
TSM932CUA+ Features
CMOS, Push-Pull, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 4.5μA
TSM932CUA+ Applications
There are a lot of Silicon Labs TSM932CUA+ linear comparators applications.
- Portable Battery Monitoring
- Mobile Communications
- Metering Systems
- Point of load regulators
- Building automation
- Industrial
- General-Purpose, Low-Voltage Applications
- Zero-Crossing Detectors
- Power management
- Handheld Instruments