Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Supplier Device Package |
8-SOIC |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Published |
2015 |
Series |
TSM93x |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
with Voltage Reference |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Base Part Number |
TSM933 |
Output Type |
CMOS, Push-Pull, TTL |
Number of Elements |
2 |
Max Supply Voltage |
11V |
Min Supply Voltage |
2.5V |
Output Current |
40mA |
Propagation Delay |
12 μs |
Quiescent Current |
4.5μA |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
2.5V~11V ±1.25V~5.5V |
Input Offset Voltage (Vos) |
10mV |
Max Dual Supply Voltage |
5.5V |
Min Dual Supply Voltage |
1.25V |
Current - Quiescent (Max) |
4.5μA |
Voltage - Input Offset (Max) |
10mV @ 2.5V |
Hysteresis |
50mV |
CMRR, PSRR (Typ) |
80dB CMRR, 80dB PSRR |
Current - Output (Typ) |
40mA |
Propagation Delay (Max) |
12μs |
RoHS Status |
RoHS Compliant |
TSM933CSA+T Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, Push-Pull, TTL output.This package has been designed with Tape & Reel (TR) .In general, the chip type can be classified as with Voltage Reference .This is a 2 element comparator.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 8 .Search TSM933 to find more pin-to-pin solutions.There is a quiescent current of 4.5μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.In general, temperatures higher than 70°C are not recommended.Comparator electronics cannot be operated at temperatures below 0°C .There is a maximum voltage supply on the comparator of 11V .This comparator can be supplied with a voltage as low as 2.5V .The part belongs to the series of comparator TSM93x .
TSM933CSA+T Features
CMOS, Push-Pull, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 4.5μA
TSM933CSA+T Applications
There are a lot of Silicon Labs TSM933CSA+T linear comparators applications.
- Zero-Crossing Detectors
- Wearable Devices
- Alarm and Monitoring Circuits
- Ultra-Low Power Systems
- General-Purpose Portable Devices
- Power management
- Laptop Computers
- Handheld Instruments
- Self-diagnostics
- Current and voltage sensing