TSM933CUA+T

Surface Mount Cut Tape (CT) 40mA mA Linear Comparators 2015 4.5μA μA 10mV mV Surface Mount

Manufacturer: Touchstone Semiconductor
Nocochips NO: 826-TSM933CUA+T
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 608
Description: Surface Mount Cut Tape (CT) 40mA mA Linear Comparators 2015 4.5μA μA 10mV mV Surface Mount (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Cut Tape (CT)
Published	2015
Series	TSM93x
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Type	with Voltage Reference
Output Type	CMOS, Push-Pull, TTL
Number of Elements	2
Nominal Supply Current	4.5μA
Power Dissipation	330mW
Output Current	40mA
Propagation Delay	12 μs
Quiescent Current	4.5μA
Common Mode Rejection Ratio	80 dB
Voltage - Supply, Single/Dual (±)	2.5V~11V ±1.25V~5.5V
Input Offset Voltage (Vos)	10mV
Power Supply Rejection Ratio (PSRR)	80dB
Voltage - Input Offset (Max)	10mV @ 2.5V
Hysteresis	50mV
CMRR, PSRR (Typ)	80dB CMRR, 80dB PSRR
Current - Output (Typ)	40mA
RoHS Status	RoHS Compliant

TSM933CUA+T Overview

The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.A comparator with an output type of CMOS, Push-Pull, TTL is being used.Ready for shipping in Cut Tape (CT) package.Speaking of types, this is a typical with Voltage Reference comparator.This element consists of 2 elements in total.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 8 .There is 4.5μA current flowing in this comparator.The PCB or other board has a Surface Mount for mounting.Normally, the nominal supply current should be 4.5μA when using the device.A comparator part from the TSM93x series is used in this part.