banner_page

TSM934CSE+

Surface Mount Tube 40mA mA Linear Comparators 2015 6.5μA μA 10mV mV Surface Mount


  • Manufacturer: Silicon Labs
  • Nocochips NO: 715-TSM934CSE+
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 565
  • Description: Surface Mount Tube 40mA mA Linear Comparators 2015 6.5μA μA 10mV mV Surface Mount (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature 0°C~70°C
Packaging Tube
Published 2015
Series TSM93x
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
ECCN Code EAR99
Type with Voltage Reference
Subcategory Comparator
Reach Compliance Code unknown
Base Part Number TSM934
Output Type CMOS, Push-Pull, TTL
Number of Elements 4
Nominal Supply Current 6.5μA
Power Dissipation 696mW
Output Current 40mA
Propagation Delay 12 μs
Quiescent Current 6.5μA
Common Mode Rejection Ratio 80 dB
Voltage - Supply, Single/Dual (±) 2.5V~11V ±1.25V~5.5V
Input Offset Voltage (Vos) 10mV
Power Supply Rejection Ratio (PSRR) 80dB
Voltage - Input Offset (Max) 10mV @ 2.5V
Hysteresis 50mV
CMRR, PSRR (Typ) 80dB CMRR, 80dB PSRR
Current - Output (Typ) 40mA
RoHS Status RoHS Compliant

TSM934CSE+ Overview


To facilitate transportation, it comes packaged in 16-SOIC (0.154, 3.90mm Width) .The comparator has a CMOS, Push-Pull, TTL output.The part is shipped by Tube .Electronic comparator is a component of the Comparator family.Electronic comparator is possible to classify the chip as with Voltage Reference .The total number of elements is 4 .Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.16 pins are present on the comparator.Try search TSM934 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 6.5μA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 6.5μA .A comparator part from the TSM93x series is used in this part.

TSM934CSE+ Features


CMOS, Push-Pull, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 6.5μA

TSM934CSE+ Applications


There are a lot of Silicon Labs TSM934CSE+ linear comparators applications.

  • Battery management and protection
  • Security Detection Systems
  • Window Comparators
  • Mobile Phones and Tablets
  • Alarm and Monitoring Circuits
  • Automotive
  • Industrial
  • Wide Range VCO; MOS Clock Timers
  • Pulse, Squarewave, and Time Delay Generators
  • Current and voltage sensing

Write a review

Note: HTML is not translated!
    Bad           Good