TSM972CSA+T
| Parameters | |
|---|---|
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | TSM972 |
| Output Type | CMOS, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 3.2μA |
| Power Dissipation | 471mW |
| Output Current | 40mA |
| Propagation Delay | 12 μs |
| Quiescent Current | 4μA |
| Response Time | 300000 ns |
| Common Mode Rejection Ratio | 67 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Input Bias Current | 5nA |
| Current - Quiescent (Max) | 4μA |
| Voltage - Input Offset (Max) | 10mV @ 2.5V |
| Current - Input Bias (Max) | 0.005μA @ 2.5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 67dB CMRR, 67dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | TSM97x |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
TSM972CSA+T Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, TTL .This chip is designed with the Tape & Reel (TR) package.The comparator has 8 terminals.The electrical component in this case belongs to the Comparator families.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.Speaking of types, this is a typical General Purpose comparator.There are a total of 2 elements in it.Electronic comparator is recommended that the mounting type be Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .There are 8 pins on the comparator.Try search TSM972 to get more pin-to-pin solutions for your special needs.This comparator presents a quiescent current of 4μA .A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 3.2μA .A comparator part from the TSM97x series is used in this part.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TSM972CSA+T Features
CMOS, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 4μA
TSM972CSA+T Applications
There are a lot of Silicon Labs TSM972CSA+T linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Lithium ion battery monitoring
- Mobile Communications
- Battery management and protection
- Portable and Battery-Powered Systems
- Motor drives
- Metering Systems
- Security Detection Systems
- Portable Battery Monitoring
- Alarm and Monitoring Circuits
