TSM982ESA+T
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | TSM982 |
| Output Type | CMOS, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 4.5μA |
| Power Dissipation | 471mW |
| Output Current | 40mA |
| Propagation Delay | 12 μs |
| Quiescent Current | 6μA |
| Response Time | 300000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Input Bias Current | 5nA |
| Current - Quiescent (Max) | 6μA |
| Voltage - Input Offset (Max) | 10mV @ 2.5V |
| Current - Input Bias (Max) | 0.005μA @ 2.5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | TSM98x |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
TSM982ESA+T Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.A comparator with a CMOS, TTL output is used here.Ready for shipping in Tape & Reel (TR) package.Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparator family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator can be classified as a with Voltage Reference chip.There are a total of 2 elements in it.The type of mounting recommended is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator is equipped with 8 pins.You may wish to search TSM982 for more solutions that address your specific needs.A quiescent current of 6μA is observed in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires 4.5μA supply current.This part is from the TSM98x comparator series.Often found in ADC circuits, this device is packed in TR .
TSM982ESA+T Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 6μA
TSM982ESA+T Applications
There are a lot of Silicon Labs TSM982ESA+T linear comparators applications.
- Handheld Instruments
- RC Timers
- General-Purpose Portable Devices
- Laptop Computers
- Metering Systems
- Alarm and Monitoring Circuits
- Hand-Held Electronics
- Power management
- System control and monitoring
- Automatic Test Equipment
