TSU8111YFPR
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 8Ohm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | ALSO OPERATES WITH BUS VOLT OF 4V TO 6.5V |
| Subcategory | Multiplexer or Switches |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Base Part Number | TSU8111 |
| Number of Outputs | 1 |
| Max Output Current | 1A |
| Number of Channels | 2 |
| Interface | I2C |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 36μA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 57 μs |
| Switch Type | USB Switch |
| Bandwidth | 820MHz |
| Turn-Off Delay Time | 5.2 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.65V~6.5V |
| Fault Protection | Over Temperature |
| Switching | BREAK-BEFORE-MAKE |
| Rds On (Typ) | 8 Ω |
| Height | 500μm |
| Length | 1.8mm |
| Width | 2.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-XFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
TSU8111YFPR Overview
The package is in the form of a Tape & Reel (TR).It is included in the package 20-XFBGA, DSBGA.Surface Mount is the mounting type of the LED driver.USB Switch is the type of switch owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The LED driver has 1 outputs.It comes under the family of TSU8111.It has a total of 20 terminations.The operation is performed through the 20 pins.The LED driving board has a total of 1 functions.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 3.6V.It has 8Ohm resistance.A self-contained LED driver with a capacity of Multiplexer or Switches is contained in an econtainer.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We currently have 2 channels available.With the help of this lighting driver, ALSO OPERATES WITH BUS VOLT OF 4V TO 6.5V can also be produced.It can handle a maximum voltage of 3.6VV.It can operate at low supply voltages, such as 1.65V volts.
TSU8111YFPR Features
Supplied from 3.6V
Resistance of 8Ohm
2 channels
Additional features like ALSO OPERATES WITH BUS VOLT OF 4V TO 6.5V
TSU8111YFPR Applications
There are a lot of Texas Instruments TSU8111YFPR Power Switches ICs applications.
- Hot Swap
- USB Protection
- Notebook and Tablet Computers
- USB Power Distribution
- Storage Drives
- HDD and SSD
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
- USB3.1 Power Delivery
- Wireless Headsets
