TSV622IDT

2 Channels 74mA per Channel 1pA 60 dB Instrumentational OP Amps 0.0001μA 1.5V~5.5V TSV622 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: STMicroelectronics
Nocochips NO: 761-TSV622IDT
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 316
Description: 2 Channels 74mA per Channel 1pA 60 dB Instrumentational OP Amps 0.0001μA 1.5V~5.5V TSV622 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	TSV622
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	29μA
Nominal Supply Current	36μA
Output Current	74mA
Slew Rate	0.19V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	60 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	1.5V~5.5V
Output Current per Channel	74mA
Input Offset Voltage (Vos)	4mV
Bandwidth	420 kHz
Unity Gain BW-Nom	420 kHz
Voltage Gain	98dB
Average Bias Current-Max (IIB)	0.0001μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00001μA
Programmable Power	NO
Power	NO
Height Seated (Max)	1.75mm
Length	4.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TSV622IDT Overview

Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. Regarding input offset voltage, op amp rates 4mV. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. As long as the supply current of the chip does not exceed 29μA, this op amp ic can operate. It is recommended to keep the voltage gain at 98dB at all times. Instrumentation amplifier has 2 channels on it. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.