TSV631ILT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TSV631 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 50μA |
| Output Current | 63mA |
| Slew Rate | 0.34V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.5V~5.5V |
| Output Current per Channel | 63mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 880 kHz |
| Unity Gain BW-Nom | 790 kHz |
| Voltage Gain | 98dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Current - Output / Channel | 74mA |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 100kHz |
| Power | NO |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 125°C |
| Height | 1.45mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TSV631ILT Overview
Op amp is packaged in SC-74A, SOT-753 case. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations is approaching the 5 mark. A total of 5 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 1.8V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 5 pins are located on the operational amplifiers. Op amp ic rates 3mV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using a supply current of 60μA , this buffer op amp will be able to operate. Voltage gain should remain at 98dB. Op amp ic has 1 channels. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. It is used TAPE AND REEL to pack the op amps.
TSV631ILT Features
5 Pins
supply voltage of 1.8V
98dB voltage gain
Output Type: Rail-to-Rail
TSV631ILT Applications
There are a lot of STMicroelectronics TSV631ILT Instrumentational OP Amps applications.
- Proportional operation circuits
- Portable electronic products powered by batteries
- Strain gauges
- Division circuits
- Blood pressure sensors
- Industrial control system
- Video computer boards
- Multimedia playback equipment
- High-frequency data acquisition systems
- Semiconductor detectors
