TSV6391AICT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TSV6391 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Output Current | 72mA |
| Slew Rate | 1.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.5V~5.5V |
| Output Current per Channel | 72mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 2.4MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 98dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TSV6391AICT Overview
Op amp is packaged in 5-TSSOP, SC-70-5, SOT-353 case. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 5. In this case, there are 5 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 1.8V. It should be noted that this op amp is a type of Operational Amplifier device. 5 pins are included on the operational amplifiers. Op amp rates 500μV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Operational amplifier can operate supply current at 60μA. Op amp is a member of the 98dB's 98dB family. 1 channels are available on the instrumentation amplifier. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method.
TSV6391AICT Features
5 Pins
supply voltage of 1.8V
98dB voltage gain
Output Type: Rail-to-Rail
TSV6391AICT Applications
There are a lot of STMicroelectronics TSV6391AICT Instrumentational OP Amps applications.
- Industrial control system
- Large motor controllers
- Video computer boards
- Addition operation circuits
- Biopotential
- Multiplication circuits
- Cinema or auditorium audio system
- Video conversion and routing
- High-frequency data acquisition systems
- Weighing systems
