TSV6395IPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TSV6395 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Power Supplies | 1.8/5V |
| Number of Channels | 4 |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Output Current | 72mA |
| Slew Rate | 1.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.5V~5.5V |
| Output Current per Channel | 72mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 2.4MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 98dB |
| Average Bias Current-Max (IIB) | 0.000001μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TSV6395IPT Overview
There is a 16-TSSOP (0.173, 4.40mm Width) case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Tape & Reel (TR) case. A total of 16 terminations have been reported in the past few weeks. A total of 16 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 1.8V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 16-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 3mV. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 60μA and 10 . There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. On the output type, there are Rail-to-Rail different types of op amps. The instrumentation amplifier is packed in the form of TAPE AND REEL.
TSV6395IPT Features
16 Pins
supply voltage of 1.8V
98dB voltage gain
Output Type: Rail-to-Rail
TSV6395IPT Applications
There are a lot of STMicroelectronics TSV6395IPT Instrumentational OP Amps applications.
- Communication device
- Television
- Active probe
- Strain gauges
- Information processing
- Scintillation detectors
- Large motor controllers
- Image computer boards
- RF cable systems
- Navigation
