TSV852AIST

2 Channels 70mA per Channel 27nA 72 dB Instrumentational OP Amps 0.11μA 2.5V~5.5V TSV852 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: STMicroelectronics
Nocochips NO: 761-TSV852AIST
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 512
Description: 2 Channels 70mA per Channel 27nA 72 dB Instrumentational OP Amps 0.11μA 2.5V~5.5V TSV852 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	2.7V
Base Part Number	TSV852
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	130μA
Nominal Supply Current	120μA
Output Current	26mA
Slew Rate	0.7V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	72 dB
Current - Input Bias	27nA
Voltage - Supply, Single/Dual (±)	2.5V~5.5V
Output Current per Channel	70mA
Input Offset Voltage (Vos)	800μV
Bandwidth	1.3MHz
Unity Gain BW-Nom	1300 kHz
Voltage Gain	110dB
Average Bias Current-Max (IIB)	0.11μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.06μA
Programmable Power	NO
Power	NO
Height	1.25mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TSV852AIST Overview

In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 800μV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 130μA and 10 . 110dB should be the voltage gain. 2 channels are available on the instrumentation amplifier. On the output type, there are Rail-to-Rail different types of op amps. It is used TAPE AND REEL to pack the op amps.