TSV853AIST

2 Channels 70mA per Channel 27nA 72 dB Instrumentational OP Amps 0.11μA 2.5V~5.5V TSV853 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: STMicroelectronics
Nocochips NO: 761-TSV853AIST
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 517
Description: 2 Channels 70mA per Channel 27nA 72 dB Instrumentational OP Amps 0.11μA 2.5V~5.5V TSV853 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.5mm
Base Part Number	TSV853
Pin Count	10
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	130μA
Nominal Supply Current	120μA
Output Current	26mA
Slew Rate	0.7V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	72 dB
Current - Input Bias	27nA
Voltage - Supply, Single/Dual (±)	2.5V~5.5V
Output Current per Channel	70mA
Input Offset Voltage (Vos)	800μV
Bandwidth	1.3MHz
Unity Gain BW-Nom	1300 kHz
Voltage Gain	110dB
Average Bias Current-Max (IIB)	0.11μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.06μA
Programmable Power	NO
Power	NO
Height	940μm
Length	3.1mm
Width	3.1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TSV853AIST Overview

It is packaged in an 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 10. The pins on this board total to 10 in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. There are 10 pins on this chip. There is an input offset voltage of 800μV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . This op amp can operate from a supply current at 130μA. 110dB should be the voltage gain. Op amp ic has 2 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.