TSV911ILT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TSV911 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 820μA |
| Nominal Supply Current | 1.1mA |
| Output Current | 35mA |
| Slew Rate | 4.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 62 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 4.5mV |
| Bandwidth | 8MHz |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 91dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 100μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Power | NO |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TSV911ILT Overview
A SC-74A, SOT-753 case is used to package the op amp. This is a General Purpose type op amp. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. During the past two weeks, there have been close to 5 terminations. Buffer amplifier has a total of 5 pins. I would like to remind you that this buffer op amp should be powered by an 3.3V battery. It should be noted that this op amp is a type of Operational Amplifier device. 5 pins are available on the instrumentation amplifier. The input offset voltage is 4.5mV. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using an 820μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design.
TSV911ILT Features
5 Pins
supply voltage of 3.3V
91dB voltage gain
Output Type: Rail-to-Rail
TSV911ILT Applications
There are a lot of STMicroelectronics TSV911ILT Instrumentational OP Amps applications.
- Automation control systems
- Addition operation circuits
- Radar
- Voltage regulation circuit
- Medical imaging
- Division circuits
- Automatic control
- Signal amplification
- Radiation thermometry transducers
- RF cable systems
