TSV912IQ2T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TSV912 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Operating Supply Current | 820μA |
| Nominal Supply Current | 1.1mA |
| Output Current | 35mA |
| Min Input Voltage | 2.5V |
| Slew Rate | 4.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 62 dB |
| Current - Input Bias | 1pA |
| Max Input Voltage | 5.5V |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 8MHz |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 91dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 100μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Power | NO |
| Height | 550μm |
| Length | 2.15mm |
| Width | 2.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TSV912IQ2T Overview
Op amp is packaged in 8-UFDFN Exposed Pad case. An op amp of this type is a General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations is approaching the 8 mark. Please take in mind that op amp should be run at 3.3V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 8 pins on it. The input offset voltage is 1.5mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . A supply current of 820μA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 91dB at all times. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.
TSV912IQ2T Features
supply voltage of 3.3V
91dB voltage gain
Output Type: Rail-to-Rail
TSV912IQ2T Applications
There are a lot of STMicroelectronics TSV912IQ2T Instrumentational OP Amps applications.
- Television
- Fission chambers
- earphone
- Commercial audio systems
- Test equipment
- Image computer boards
- Communication
- High input resistance broadband
- Cinema or auditorium audio system
- Mobile phone
