TSV912IYDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TSV912 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Operating Supply Current | 820μA |
| Nominal Supply Current | 1.1mA |
| Output Current | 35mA |
| Slew Rate | 4.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 58 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 8MHz |
| Unity Gain BW-Nom | 8000 kHz |
| Average Bias Current-Max (IIB) | 0.000001μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
TSV912IYDT Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. This linear amplifier should be powered by an 3.3V battery. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. The input offset voltage is 100μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Operational amplifier can operate supply current at 820μA. There are 2 circuits on this op amp. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 5.5V. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. The Automotive, AEC-Q100 represents the op amp's series number.
TSV912IYDT Features
8 Pins
supply voltage of 3.3V
Output Type: Rail-to-Rail
TSV912IYDT Applications
There are a lot of STMicroelectronics TSV912IYDT Instrumentational OP Amps applications.
- Professional videography
- Laptop
- Wireless base stations
- Image computer boards
- Polarized electrodes
- Home audio systems
- Measurements of Wheatstone bridge
- Power transmission
- ECG equipment
- Video amplifiers
