TUSB1105RTZR
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | IT REQUIRES 3.3V SUPPLY |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TUSB1105 |
| Pin Count | 16 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4V |
| Operating Supply Current | 6mA |
| Load Capacitance | 600pF |
| Number of Ports | 1 |
| Nominal Supply Current | 8mA |
| Output Current | 2mA |
| Number of Bits | 1 |
| Family | USB |
| Data Rate | 1.5Mbps |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Protocol | USB 2.0 |
| Max I(ol) | 0.002 A |
| Number of Drivers/Receivers | 1/1 |
| Duplex | Half |
| Receiver Hysteresis | 450mV |
| ESD Protection | Yes |
| Count Direction | UNIDIRECTIONAL |
| USB | USB 2.0 |
| Translation | N/A |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 20 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFQFN Exposed Pad |
TUSB1105RTZR Overview
LED drivers benefit from this IC's enhanced 16-UFQFN Exposed Pad package.The Tape & Reel (TR) package houses this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.Power supply requirements for this differential driver are 1.65V~3.6V.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.Wide receiver can operate within the range of 5V supply voltages efficiently.In this wide receiver, 16 terminations are integrated for driving and receiving signals from data.There are 16 pinouts available on this transceiver which are market standard.Since the base part number TUSB1105 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.A 16-pin driver IC with enhanced power dissipation control is featured here.In addition, the optical transceiver module's IT REQUIRES 3.3V SUPPLY function improves signal management accuracy and stability overall.It is capable of driving LEDs with a voltage of 6mA as the input voltage to this integrating circuit.For this transceiver module, a voltage lower than 5.5V is recommended by the manufacturer.In order to run this module isolated transceiver, you should apply at least 4V voltage supply to it.A 2mA output current can be obtained from this bluetooth transceiver
TUSB1105RTZR Features
Tape & Reel (TR) package
16 pin count
16 pins
TUSB1105RTZR Applications
There are a lot of Texas Instruments TUSB1105RTZR Drivers/Receivers/Transceivers applications.
- Single fiber bidirectional application
- WDM transmission
- Cordless telephone
- Wireless 3D game
- Vehicle
- Carrier phase observations
- Satellite communication
- Wireless modems
- Shortwave receiver
- Wireless HD Photography
