TUSB6250PFC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Surface Mount | YES |
| Number of Pins | 80 |
| Weight | 373.590016mg |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Applications | USB 2.0 to ATA/ATAPI Bridge |
| Subcategory | Bus Controllers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TUSB6250 |
| Pin Count | 80 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Interface | ATA, ATAPI |
| Operating Supply Current | 78mA |
| uPs/uCs/Peripheral ICs Type | BUS CONTROLLER, UNIVERSAL SERIAL BUS |
| Clock Frequency | 24MHz |
| Supply Current-Max | 92mA |
| Data Rate | 480 Mbps |
| Number of Transceivers | 1 |
| Bus Compatibility | ATA; ATAPI |
| Height | 1.2mm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TUSB6250PFC Overview
It's a good fit for the 80-TQFP package.It is packaged in a Tray case.The component is installed in the way indicated by Surface Mount.The component applied in USB 2.0 to ATA/ATAPI Bridgeis appropriate.An output voltage of 3V~3.6V volts can be provided by the device.On the basis of the [0], it is possible to find related parts.The number of terminations is 80.It is recommended that you set this device to 3.3V.There are a total of 80 pins on it.Operation is performed through the 80pins.The unit operates at a minimum working temperature of 0°Cin order to ensure reliable operation.When 70°Cis the maximum value, the part will run consistently.Electronic components from the family Bus Controllersare used.This interface IC operates at a voltage of 3.3V.In this device, there is BUS CONTROLLER, UNIVERSAL SERIAL BUS uPs/uCs/peripheral IC.Ideally, its output frequency should not exceed 24MHz.
TUSB6250PFC Features
It is based on TUSB6250.
Set the part at 3.3V volts
BUS CONTROLLER, UNIVERSAL SERIAL BUS of uPs/uCs/Peripheral ICs Type
TUSB6250PFC Applications
There are a lot of Texas Instruments TUSB6250PFC Specialized Interface ICs applications.
- Cellular phones
- Compatible with 65 V DACs and ADCs such as
- Ultrasound
- Short/Medium Loop: approximately 2000 ft. of 26 AWG,
- Precision test equipment
- E1 Multiplexer
- ?Wireless Local Loop, Intelligent PBX, ISDN NT1/TA
- PCMCIA cards
- Data Acquisition Systems
- Digital cross connects (DSX-1)
