TUSB6250PFCG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Surface Mount | YES |
| Number of Pins | 80 |
| Weight | 373.590016mg |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Applications | USB 2.0 to ATA/ATAPI Bridge |
| HTS Code | 8542.39.00.01 |
| Subcategory | Bus Controllers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TUSB6250 |
| Pin Count | 80 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Interface | ATA, ATAPI |
| uPs/uCs/Peripheral ICs Type | BUS CONTROLLER, UNIVERSAL SERIAL BUS |
| Clock Frequency | 24MHz |
| Supply Current-Max | 92mA |
| External Data Bus Width | 16 |
| Bus Compatibility | ATA; ATAPI |
| Data Transfer Rate-Max | 60 MBps |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TUSB6250PFCG4 Overview
It's a good fit for the 80-TQFP package.It comes in a case with a [0].The component is installed according to Surface Mount.This component applies to USB 2.0 to ATA/ATAPI Bridge.The ability to supply 3V~3.6V volts is available with certain devices.By using the [0], it is possible to find parts that are related.The terminations on it are [0].Make sure this device is set to 3.3V.In total, it contains 80pins.In order for the operation to be performed, the 80pins must be connected.A minimum working temperature of 0°Cis required to ensure the reliability of the device.By setting the value of 70°Cto the maximum, this ensures that the part will run consistently.Electronic components in this system belong to the Bus Controllers family.In the interface IC, the supply voltage is set to 3.3V.This device consists of BUS CONTROLLER, UNIVERSAL SERIAL BUS UPs, UCs, or peripheral ICs.Ideally, its output frequency should not exceed 24MHz.
TUSB6250PFCG4 Features
It is based on TUSB6250.
Set the part at 3.3V volts
BUS CONTROLLER, UNIVERSAL SERIAL BUS of uPs/uCs/Peripheral ICs Type
TUSB6250PFCG4 Applications
There are a lot of Texas Instruments TUSB6250PFCG4 Specialized Interface ICs applications.
- Optical Applications
- Video switching
- Medical Instrumentation
- Short/Medium Loop: approximately 2000 ft. of 26 AWG,
- DVD-R
- Sample-and-hold systems
- T1/E1 Terminals
- Industrial and process control systems
- High-Voltage
- DSLAMs
