TWL1200YFFR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 49-UFBGA, DSBGA |
| Number of Pins | 49 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Audio, SIM Card Interface, UART |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 49 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other Interface ICs |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | TWL1200 |
| Pin Count | 49 |
| Number of Outputs | 19 |
| Output Type | Open Drain |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.1V |
| Nominal Supply Current | 30μA |
| Number of Bits | 19 |
| Propagation Delay | 7 ns |
| Quiescent Current | 30μA |
| Turn On Delay Time | 19 ns |
| Logic Function | Translator |
| Data Rate | 60Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Interface IC Type | LINE TRANSCEIVER |
| Driver Number of Bits | 1 |
| High Level Output Current | -8mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 8mA |
| Receiver Number of Bits | 1 |
| Interface Standard | GENERAL PURPOSE |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.1V~3.6V |
| Voltage - VCCB | 1.1V~3.6V |
| Channels per Circuit | 4 |
| Height | 625μm |
| Length | 0m |
| Width | 0m |
| Thickness | 425μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TWL1200YFFR Overview
In the package 49-UFBGA, DSBGA, it can be found.Tape & Reel (TR) is the packaging method.In this configuration, the output is set to Open Drain.Translator type Voltage Level is assigned to this electrical device.Level translators is mounted according to the Surface Mount method.Level translators has the Channel type Bidirectional.The temperature used for operation is -40°C~85°C TA.1 circuits are used to provide this superior level of flexibility.Usually, when a transmission line is terminated, there are 49 termination points used.A base part number TWL1200 indicates the related parts.The supply voltage of this device is 2.5V, and it is powered by it.Pin count is 49.The pin configuration of the device is 49.Electronic parts are designed with a number of bits of 19.Voltages up to 3.6V can be supplied.This device requires a minimum voltage of 1.1V.1.1V~3.6V is the configuration of the VCCA supply rail.VCCB is configured with a supply rail that starts at 1.1V~3.6V.The mount method is Surface Mount.As part of Other Interface ICs, this part is included.Level translators consumes 30μA quiescent current and is not affected by external factors.When operating, Audio, SIM Card Interface, UART can be ensured.Outputs are set to 19.
TWL1200YFFR Features
49-UFBGA, DSBGA package
1 circuits
49 pin count
49 pins
19 outputs
TWL1200YFFR Applications
There are a lot of Texas Instruments TWL1200YFFR voltage translators & level shifters applications.
- Eliminate slow or noisy input signals
- Automotive
- Debouncing a mechanical switch
- Routers (routing equipment)
- Telecom
- SDIO
- One Fabrication Site
- Data and Clock Transmission Over Backplane
- Driving Indicator LEDs or Buzzers
- Automotive infotainment
