TXB0101DRLT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-563, SOT-666 |
| Number of Pins | 6 |
| Weight | 2.806603mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto-Direction Sensing |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Subcategory | Other Interface ICs |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TXB0101 |
| Pin Count | 6 |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Number of Bits | 1 |
| Propagation Delay | 4 ns |
| Supply Current-Max | 0.008mA |
| Turn On Delay Time | 31 ns |
| Logic Function | Translator |
| Data Rate | 100Mbps |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 20μA |
| Supply Voltage1-Nom | 1.8V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~3.6V |
| Voltage - VCCB | 1.65V~5.5V |
| Height | 600μm |
| Length | 1.6mm |
| Width | 1.2mm |
| Thickness | 550μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TXB0101DRLT Overview
Embedded in the SOT-563, SOT-666 package, it is now available to you.Packaged in the way of Tape & Reel (TR).Tri-State, Non-Inverted is the output configured for it.The translator type of this electrical device is Voltage Level.A Surface Mount mounting method has been used for this electronic part.In this electrical device, the Channel type is Bidirectional.During operation, the temperature is set to -40°C~85°C TA.As part of the transmission line termination process, there are a total of 6 terminations.Parts that are related to TXB0101 can be identified based on its base part number.A supply voltage of 1.5V is used to power the device.6 pins are present on this board.The board has 6 pins.There are 1 bits in this electronic part, which means it is designed in such a way.Voltages up to 5.5V can be supplied.A voltage of 1.65V is the minimum supply voltage required for it to operate.Level translators is configured from 1.2V~3.6V for the VCCA supply rail.VCCB is configured with a supply rail that starts at 1.65V~5.5V.Mounting this electronic component is done using the Surface Mount method.There are no channels.I would classify it as part of the group of Other Interface ICs.During operation, Auto-Direction Sensing can be ensured.
TXB0101DRLT Features
SOT-563, SOT-666 package
6 pin count
6 pins
TXB0101DRLT Applications
There are a lot of Texas Instruments TXB0101DRLT voltage translators & level shifters applications.
- Handset
- ADAS Fusion
- Routers (Telecom Switching Equipment)
- UART
- Data and Clock Transmission Over Backplane
- Tablet PCs
- Product Traceability
- GPIO
- Telecommunications
- Controlled Baseline
