TXB0102DCURG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto-Direction Sensing |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Interface ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TXB0102 |
| Pin Count | 8 |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Bits | 2 |
| Propagation Delay | 31 ns |
| Turn On Delay Time | 7.4 ns |
| Logic Function | Translator |
| Data Rate | 100Mbps |
| Output Characteristics | 3-STATE |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 20μA |
| Supply Voltage1-Nom | 1.8V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~3.6V |
| Voltage - VCCB | 1.65V~5.5V |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TXB0102DCURG4 Overview
8-VFSOP (0.091, 2.30mm Width) contains it.A Tape & Reel (TR) package is used to package it.This output uses Tri-State, Non-Inverted.Level translators is the Voltage Level type of translator that is used in this electrical device.The electronic part is mounted using the Surface Mount method.A Bidirectional channel type is associated with this electrical device.The temperature used for operation is -40°C~85°C TA.The superior flexibility of the system is achieved through its use of 1 circuits.Usually, when a transmission line is terminated, there are 8 termination points used.Based on this base part number TXB0102, its related parts can be identified.This device is powered by a supply voltage of 1.5V which is applied to it.The pin count of this device is 8.Level translators is designed wLevel translatorsh 8 pins.Level translators is designed wLevel translatorsh 2 bLevel translatorss.The maximum supply voltage is 5.5V.A voltage of 1.2V is the minimum supply voltage required for it to operate.In the VCCA, the supply rail is set to 1.2V~3.6V.From 1.65V~5.5V, the supply rail of the VCCB is configured.Electronic parts are mounted using Surface Mount.2 is the number of channels.I would classify it as part of the group of Other Interface ICs.When operating, Auto-Direction Sensing can be ensured.
TXB0102DCURG4 Features
8-VFSOP (0.091, 2.30mm Width) package
1 circuits
8 pin count
8 pins
TXB0102DCURG4 Applications
There are a lot of Texas Instruments TXB0102DCURG4 voltage translators & level shifters applications.
- Industrial
- Public Signage
- Debouncing a mechanical switch
- Test Site
- Telematics
- SDIO
- Extended Product-Change Notification
- Notebook
- One Fabrication Site
- MDIO
