TXS0102DCUTG4
| Parameters | |
|---|---|
| Channel Type | Bidirectional |
| Low Level Output Current | 1mA |
| Supply Voltage1-Nom | 2.5V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~3.6V |
| Voltage - VCCB | 2.3V~5.5V |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto-Direction Sensing |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Other Interface ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TXS0102 |
| Pin Count | 8 |
| Output Type | Open Drain, Push-Pull |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Number of Bits | 2 |
| Propagation Delay | 260 ns |
| Quiescent Current | 14.4μA |
| Turn On Delay Time | 260 ns |
| Logic Function | Translator |
| Data Rate | 24Mbps |
| Output Characteristics | 3-STATE |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -20μA |
TXS0102DCUTG4 Overview
In the package 8-VFSOP (0.091, 2.30mm Width), it can be found.Tape & Reel (TR) is the packaging method.This output is configured with Open Drain, Push-Pull.Its translator type is Voltage Level.A Surface Mount mounting method has been used for this electronic part.Level translators has the Channel type Bidirectional.Operation is performed at -40°C~85°C TA.The circuit's superior flexibility is achieved through the use of 1 circuits.When it comes to terminating a transmission line, there are 8 terminations.A base part number TXS0102 indicates the related parts.Level translators is powered from a supply voltage of 1.8V.A total of 8 pins are included.The pin configuration of the device is 8.The design of this electronic part contains 2 bits.Supports a voltage of 5.5V as its maximum supply voltage.Level translators operates wLevel translatorsh the minimal supply voltage of 2.3V.A VCCA supply rail is configured as 1.65V~3.6V.2.3V~5.5V is the configuration of the VCCB supply rail.This electronic part is mounted in the way of Surface Mount.Channels are set to 2.In Other Interface ICs, you will find this part.Level translators consumes 14.4μA of quiescent current wLevel translatorshout being affected by outside factors.When operating, Auto-Direction Sensing is guaranteed.
TXS0102DCUTG4 Features
8-VFSOP (0.091, 2.30mm Width) package
1 circuits
8 pin count
8 pins
TXS0102DCUTG4 Applications
There are a lot of Texas Instruments TXS0102DCUTG4 voltage translators & level shifters applications.
- Extended Product-Change Notification
- One Assembly
- Motor Drives
- Controlled Baseline
- Data and Clock Transmission Over Backplane
- I2C / SMBus
- One Assembly and Test Site
- Notebook
- Product Traceability
- Handset
