TXS0102DQER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto-Direction Sensing |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Other Interface ICs |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.35mm |
| Base Part Number | TXS0102 |
| Pin Count | 8 |
| Output Type | Open Drain, Push-Pull |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 14.4μA |
| Number of Bits | 2 |
| Propagation Delay | 28 ns |
| Quiescent Current | 14.4μA |
| Turn On Delay Time | 260 ns |
| Logic Function | Translator |
| Data Rate | 24Mbps |
| Output Characteristics | 3-STATE |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 1mA |
| Supply Voltage1-Nom | 2.5V |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 85°C |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~3.6V |
| Voltage - VCCB | 2.3V~5.5V |
| Height | 400μm |
| Length | 1.4mm |
| Width | 1mm |
| Thickness | 370μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TXS0102DQER Overview
In the 8-XFDFN package, it is embedded.This package has the format of Tape & Reel (TR).This output uses Open Drain, Push-Pull.Level translators has the translator type Voltage Level.Surface Mount is the method used for mounting this electronic part.Bidirectional is the type of channel for this electrical device.Operation is performed at -40°C~85°C TA.Flexible 1 circuits enable it to achieve high performance.There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Parts related to a base part number TXS0102 are designated by the same number.Level translators is powered by a 1.8V supply.8 pins are present on this board.There are 8 pins on it.An electronic part with 2 bits is designed.Level translators supports the maximal supply voltage of 5.5V.The minimal voltage for operation is 1.65V.In the VCCA supply rail, 1.65V~3.6V is configured.Level translators is configured from 2.3V~5.5V for the VCCB supply rail.This mount is done using the method of Surface Mount.Channels are set to 2.This part is included in Other Interface ICs.There are no external factors that affect it, so it consumes 14.4μA quiescent current.Auto-Direction Sensing can be ensured when operating.
TXS0102DQER Features
8-XFDFN package
1 circuits
8 pin count
8 pins
TXS0102DQER Applications
There are a lot of Texas Instruments TXS0102DQER voltage translators & level shifters applications.
- Eliminate Slow or Noisy Input Signals
- Automotive
- Personal computers
- Available in Military (–55°C/125°C) Temperature Range
- Driving indicator LEDs or buzzers
- Driving Indicator LEDs or Buzzers
- Extended Product Life Cycle
- Handset
- SDIO
- Electronic Points of Sale
