TXS0102YZTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFBGA, DSBGA |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Auto-Direction Sensing |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other Interface ICs |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TXS0102 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Open Drain, Push-Pull |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Propagation Delay | 4.6 ns |
| Quiescent Current | 14.4μA |
| Turn On Delay Time | 260 ns |
| Logic Function | Translator |
| Data Rate | 24Mbps |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 1mA |
| Supply Voltage1-Nom | 2.5V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~3.6V |
| Voltage - VCCB | 2.3V~5.5V |
| Width | 0.9mm |
| RoHS Status | ROHS3 Compliant |
TXS0102YZTR Overview
8-UFBGA, DSBGA contains it.Tape & Reel (TR) is the packaging method.This output uses Open Drain, Push-Pull.Level translators has the translator type Voltage Level.Surface Mount is the way in which this electronic part is mounted.Level translators has the Channel type Bidirectional.The operating temperature is -40°C~85°C TA.Flexible 1 circuits enable it to achieve high performance.To end a transmission line, there are 8 types of termination that can be used.Parts that are related to TXS0102 can be identified based on its base part number.A supply voltage of 1.8V is used to power the device.The pin count of this device is 8.In addition, it is designed with a pin number of 8.Voltages up to 5.5V can be supplied.There is a minimum supply voltage of 2.3V for it.In the VCCA, the supply rail is set to 1.65V~3.6V.In the VCCB supply rail, 2.3V~5.5V is configured.Surface Mount is used for mounting.2 is the number of channels available in the system.In Other Interface ICs, you will find this part.Level translators consumes 14.4μA of quiescent current wLevel translatorshout being affected by outside factors.As long as Auto-Direction Sensing is ensured, operations will succeed.
TXS0102YZTR Features
8-UFBGA, DSBGA package
1 circuits
8 pin count
8 pins
TXS0102YZTR Applications
There are a lot of Texas Instruments TXS0102YZTR voltage translators & level shifters applications.
- SDIO
- I2C / SMBus
- Routers (routing equipment)
- Data and Clock Transmission Over Backplane
- Debouncing a Mechanical Switch
- ADAS Fusion
- Telecom
- MDIO
- UART
- Eliminate slow or noisy input signals
