TXS0104EPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto-Direction Sensing |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Interface ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TXS0104 |
| Pin Count | 14 |
| Output Type | Open Drain, Push-Pull |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Number of Bits | 4 |
| Propagation Delay | 260 ns |
| Quiescent Current | 14.4μA |
| Turn On Delay Time | 260 ns |
| Logic Function | Translator |
| Data Rate | 24Mbps |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -20μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 1mA |
| Supply Voltage1-Nom | 3.3V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~3.6V |
| Voltage - VCCB | 2.3V~5.5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TXS0104EPWRG4 Overview
The 14-TSSOP (0.173, 4.40mm Width) package contains it.The package is in the form of Tape & Reel (TR).Level translators uses Open Drain, Push-Pull as the output.Level translators is the Voltage Level type of translator that is used in this electrical device.Mounting this electronic component follows the Surface Mount method.In this electrical device, the Channel type is Bidirectional.A temperature of -40°C~85°C TA is used for operation.Level translators achieves superior flexibilLevel translatorsy by using 1 circuLevel translatorss.To end a transmission line, there are 14 types of termination that can be used.A series of related parts can be determined from the base part number TXS0104.In order to power the device, a voltage supply of 1.8V is required.14 pins are present on this board.The pin configuration of the device is 14.The design of this electronic part contains 4 bits.Level translators supports a maximum supply voltage of 5.5V.The minimal supply voltage is 2.3V.In the VCCA supply rail, 1.65V~3.6V is configured.2.3V~5.5V is the supply rail configuration on the VCCB.Mounting this electronic component is done using the Surface Mount method.Channels are set to 4.Other Interface ICs contains this part.Level translators consumes 14.4μA of quiescent current wLevel translatorshout being affected by external factors. During operation, Auto-Direction Sensing can be ensured.
TXS0104EPWRG4 Features
14-TSSOP (0.173, 4.40mm Width) package
1 circuits
14 pin count
14 pins
TXS0104EPWRG4 Applications
There are a lot of Texas Instruments TXS0104EPWRG4 voltage translators & level shifters applications.
- Industrial
- Tablet PCs
- TVs
- Personal Electronics
- GPIO
- SMBus
- Enterprise and communications
- Routers (routing equipment)
- Product Traceability
- Enterprise
