TXS0108EZXYR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFBGA |
| Number of Pins | 20 |
| Weight | 21.800783mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Auto-Direction Sensing |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other Interface ICs |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TXS0108 |
| Pin Count | 20 |
| Output Type | Open Drain, Push-Pull |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Bits | 8 |
| Propagation Delay | 4.8 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 312 ns |
| Logic Function | Translator |
| Data Rate | 60Mbps |
| Output Characteristics | 3-STATE |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -50mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 50mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~3.6V |
| Voltage - VCCB | 1.65V~5.5V |
| Height | 610μm |
| Length | 2.5mm |
| Width | 3mm |
| Thickness | 360μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TXS0108EZXYR Overview
In the package 20-UFBGA, it can be found.This package has the format of Tape & Reel (TR).This output is configured with Open Drain, Push-Pull.There is a translator type of Voltage Level for this electrical device.Surface Mount is the method used for mounting this electronic part.Bidirectional is the Channel type of this electrical device.-40°C~85°C TA is the operating temperature.Its superior flexibility is achieved by using 1 circuits.When it comes to terminating a transmission line, there are 20 terminations.Parts related to a base part number TXS0108 are designated by the same number.This device is powered by a supply voltage of 2.5V which is applied to it.20 pins are present on this board.There are 20 pins on it.The design of this electronic part is based on 8 bits.Voltages above 5.5V are supported.There is a minimum supply voltage of 1.2V for it.1.2V~3.6V is the supply rail configuration on the VCCA.The VCCB supply rail is configured from 1.65V~5.5V.Using the method of Surface Mount, this electronic component is mounted.Channels are set to 8.As part of Other Interface ICs, it belongs.There are no external factors that affect it, so it consumes 3μA quiescent current.In order to ensure Auto-Direction Sensing during operation, there are several things to consider.
TXS0108EZXYR Features
20-UFBGA package
1 circuits
20 pin count
20 pins
TXS0108EZXYR Applications
There are a lot of Texas Instruments TXS0108EZXYR voltage translators & level shifters applications.
- Notebook
- Debouncing a mechanical switch
- Advanced Driver Assistance System (ADAS)
- I2C
- One Assembly
- GPIO
- Driving Indicator LEDs or Buzzers
- Controlled Baseline
- Routers (routing equipment)
- Personal computers
