UA747CN
| Parameters | |
|---|---|
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | UA747 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 1.7mA |
| Nominal Supply Current | 2.8mA |
| Power Dissipation | 800mW |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 6mV |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
UA747CN Overview
In order to protect the op amps, a 14-DIP (0.300, 7.62mm) case is used. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. The number of terminations approaches 14. Buffer amplifier has a total of 14 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 14 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 6mV. This electronic part is recommended for mounting type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. A supply current of 1.7mA can be used to operate this linear amplifier. Voltage gain should remain at 106.02dB. There are 2 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 18V.
UA747CN Features
14 Pins
supply voltage of 15V
106.02dB voltage gain
UA747CN Applications
There are a lot of Texas Instruments UA747CN Instrumentational OP Amps applications.
- Differentiator circuits
- Power control
- Digital cameras
- Scintillation detectors
- Signal operation
- Automotive sensors
- RF cable systems
- Medical imaging
- Radiation thermometry transducers
- High/low-pass filter circuit
