Parameters |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Package / Case |
PDIP |
Surface Mount |
NO |
Number of Pins |
14 |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
THROUGH-HOLE |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Pin Count |
14 |
Operating Supply Voltage |
18V |
Number of Elements |
2 |
Power Supplies |
+-15V |
Temperature Grade |
COMMERCIAL |
Operating Supply Current |
1.7mA |
Nominal Supply Current |
2.8mA |
Power Dissipation |
800mW |
Slew Rate |
0.5 V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
OPERATIONAL AMPLIFIER |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
800nA |
Output Current per Channel |
25mA |
Input Offset Voltage (Vos) |
6mV |
Bandwidth |
1MHz |
Gain Bandwidth Product |
1MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
1000 kHz |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.5μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Max Dual Supply Voltage |
18V |
Low-Bias |
NO |
Micropower |
NO |
Min Dual Supply Voltage |
3.5V |
Bias Current-Max (IIB) @25C |
0.5μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
1MHz |
Max I/O Voltage |
6mV |
Height |
5.08mm |
Length |
19.3mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
UA747CNE4 Overview
The linear amplifier is packaged in a PDIP case. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. There is a Rail/Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be 14 terminations in the next few months. Buffer amplifier has a total of 14 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. In terms of input offset voltage, operational amplifier rates 6mV. Using a supply current of 1.7mA , this buffer op amp will be able to operate. Keeping the voltage gain at 106.02dB is the best course of action. This instrumentation amplifier cannot operate below 0°C degrees Celsius. Use op amps only at temperatures no higher than 70°C. For the operating supply voltage of the op amp ic, there is a rating of 2. The operating supply voltage of instrumentation amplifier is rated 18V voltage. This electronic part should be conducted with a dual supply voltage of 18V volts for this part.
UA747CNE4 Features
14 Pins
supply voltage of 15V
106.02dB voltage gain
UA747CNE4 Applications
There are a lot of Texas Instruments UA747CNE4 Instrumentational OP Amps applications.
- Portable docking station
- Professional videography
- Car stereo
- Computer workstations
- Exponential operation circuits
- Tablets
- Communication device
- Weak signal detection
- Gaming industry
- Band-stop filter