UA9636ACP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-PDIP |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Driver |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 10.8V~13.2V |
| Base Part Number | UA9636 |
| Operating Supply Voltage | 12V |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 10.8V |
| Nominal Supply Current | 18mA |
| Data Rate | 7 kbps |
| Protocol | RS232, RS423 |
| Max Dual Supply Voltage | 13.2V |
| Number of Drivers/Receivers | 2/0 |
| Min Dual Supply Voltage | 10.8V |
| Dual Supply Voltage | 12V |
| Number of Drivers | 2 |
| Number of Transmitters | 2 |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UA9636ACP Overview
This LED driver IC features an enhanced 8-DIP (0.300, 7.62mm) package for driving common LEDs.There is a Tube package for this receiver.Several solutions have used this Driver can transceiver in a variety of applications due to its Driver IC nature.The wide receiver can be mounted on any Through Hole-type PCB or development board.In terms of power supply, this differential driver utilizes 10.8V~13.2V.As many as 2/0 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.For more variants of this part, try searching with the base part number UA9636, which indicates the product type, temperature, package, etc.An enhanced power dissipation control is provided by this 8-pin driver IC.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Through Hole mounting techniques.An input voltage supply of 12V is required to operate the transceiver module.Embedded 2 drivers are included on the integrator circuit.There must be a transceiver module's temperature below 70°C during operation.It must not be less than 0°C degrees Celsius for this optical transceiver to operate properly.It is specified that the transceiver's maximum supply voltage for this IC shall be 13.2V.A transmitter, or can transceiver that produces radio waves with the aid of an antenna, is used in telecommunications to transmit or send data.This line driver ic requires a minimum supply voltage of 10.8V to function properly.There is a 8-PDIP supplier package included with wide receiver.A 13.2V maximum dual supply voltage arrangement is provided as part of this integrated circuit.If you are considering to use a power supply for this can transceiver, you'd better choose one with a 10.8V output voltage since the can transceiver operates with dual supply voltages.
UA9636ACP Features
Tube package
8 pins
UA9636ACP Applications
There are a lot of Texas Instruments UA9636ACP Drivers/Receivers/Transceivers applications.
- Gigabit Ethernet
- Wireless showroom
- Transmission stations
- Indoor ad hoc meeting
- Wireless multimedia center in smart home
- IP cameras
- Precision geodetic measurement
- IPTV front end
- Wireless security systems
- Radio transmission
