UC2524ADW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 450kHz |
| Base Part Number | UC2524 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Quiescent Current | 5mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 120ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Nominal Input Voltage | 40V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 45% |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2524ADW Overview
It comes in the 16-SOIC (0.295, 7.50mm Width) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 2 output generation. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. A 8V~40V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 500kHz position. dc dc regulator can be generalized using Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. Various 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The nominal DC switcher's voltage input is 20V. Other relevant dc to dc converter ics can be found by searching "UC2524". There are 16 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 60V voltage. If you start a project, note down the dc dc regulator's usual output current of 100mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. Switching controller operates at 450kHz Hz. As long as the dc switching is in a dormant state, it utilizes 5mA. A nominal working status is achieved when the input voltage is set to 40V.
UC2524ADW Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
UC2524ADW Applications
There are a lot of Texas Instruments UC2524ADW DC to DC converter applications.
- Gear/thread machining machines
- Computed tomography (CT)
- Automatic plug-in machines
- Emergency lighting monitoring equipment
- PSRR circuits
- Electric water heaters
- Domestic water pumps
- Network technology
- seismic instrument power circuits
- Access control systems
