UC2524ADWTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 450kHz |
| Base Part Number | UC2524 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 80V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 120ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Nominal Input Voltage | 40V |
| Max Duty Cycle | 45 % |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2524ADWTR Overview
This switching controller fits most application requirements since it is packaged in a 16-SOIC (0.295, 7.50mm Width) package. dc motor controller is suitable for 2 output generation. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at 8V~40V volts and has 8V~40V supply voltage. A -40°C~85°C TA dc switcher is not a problem. With this switching controller, you can switch at 500kHz. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Frequency Control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. A switching converters's terminal (s) sits at the DUAL position. A variety of 16 terminations are available in dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 20V. Searching "UC2524" will return other relevant dc to dc converter ics. In total, switching converter has 16 pins. Switching converter type is specifically Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 80V. You should note down the dc dc regulator's usual output current of 200mA when you start a project. It is set to 45 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. A frequency of 450kHz is used by the switching controller. For nominal working status, the input voltage can be set as 40V.
UC2524ADWTR Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 450kHz
UC2524ADWTR Applications
There are a lot of Texas Instruments UC2524ADWTR DC to DC converter applications.
- Printing equipment
- Die casting equipment
- Smoke exhaust equipment
- Digital video recorders
- Product burn-in
- Domestic water pumps
- Smoke prevention equipment
- Sensitive electronic devices
- Wide-range voltage regulation circuits
- Boring machines
