UC2524DW
| Parameters | |
|---|---|
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 450kHz |
| Base Part Number | UC2524 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 40V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Control Features | Current Limit, Enable, Frequency Control, Ramp |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 200ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 100 ns |
| Nominal Input Voltage | 40V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 45% |
| Output Phases | 1 |
UC2524DW Overview
It comes in the 16-SOIC (0.295, 7.50mm Width) package, which makes switching controller suitable for most applications. 2 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tube. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 8V~40V. Worked in an dc switcher with a -25°C~85°C TA rating. The switching controller is capable of switching at the 300kHz position. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Ramp. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 16 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input of 20V. A search for "UC2524" will reveal other relevant dc to dc converter ics. 16 pins are on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. The test statistics indicate that DC regulator outputs a voltage of 40V. It's important to remember that the dc dc regulator's normaloutput current is 100mA, so you should note it down when starting a new project. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. Switching controllers work at 450kHz Hz. For nominal working status, the input voltage can be set as 40V.
UC2524DW Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit, Enable, Frequency Control, Ramp
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
UC2524DW Applications
There are a lot of Texas Instruments UC2524DW DC to DC converter applications.
- Special machining machine tools
- Direct power supply system
- Computer application technology
- Electrical distribution systems
- Imported equipment
- Ball screw pair
- Precision electronic equipment
- Series voltage regulation circuits
- Adjustable voltage or current linear circuits
- Refrigerators of central air conditioners
