UC2524NG4
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Frequency | 450kHz |
| Base Part Number | UC2524 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 40V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Control Features | Current Limit, Enable, Frequency Control, Ramp |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 200ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 100 ns |
| Nominal Input Voltage | 40V |
| Max Duty Cycle | 45 % |
| Output Phases | 1 |
| Height | 4.57mm |
| Length | 19.3mm |
| Width | 6.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UC2524NG4 Overview
The switching controller fits in the 16-DIP (0.300, 7.62mm) package and is ideal for most applications. 2 outputs can be generated with the dc motor controller. Tube solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 8V~40V. A -25°C~85°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 300kHz . dc dc regulators can be carried out with Through Hole. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Ramp which allows efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 16. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 20V. In addition to "UC2524", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 16 pins. The type is a particular Switching Regulator or Controllers of switching converter. A 40V voltage of DC regulator was detected in the test statistics. normally, the dc dc regulator's output current is 100mA, which you should keep in mind when starting a project. Voltage regulator dc to dc is designed to operate at 45 % duty cycle during power-ups and power-downs to ensure reliability. Switching controllers work at 450kHz Hz. It is possible to set the input voltage as 40V for nominal working statuses.
UC2524NG4 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit, Enable, Frequency Control, Ramp
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 450kHz
UC2524NG4 Applications
There are a lot of Texas Instruments UC2524NG4 DC to DC converter applications.
- Experimental setup
- Precision electronic equipment
- Current source circuits
- Scientific research
- Geothermal power
- Pipe bending machines
- Correction machines
- Laboratories
- Automatic testing equipment
- Flexible manufacturing cells
