UC2525BDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 450kHz |
| Base Part Number | UC2525 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Quiescent Current | 14mA |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100Hz~400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 35V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2525BDW Overview
It comes in a 16-SOIC (0.295, 7.50mm Width) package, so switching controller can be used for most applications. dc motor controller is suitable for 2 output generation. A solid enclosure of Tube surrounds pmic. The program can handle Transistor Driver dc switching's outputs (s). A 8V~35V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a -40°C~85°C TA. In this switching controller, the switch can be set to 100Hz~400kHz. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Dead Time Control, Frequency Control, Ramp, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. Various 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 20V. You can find other relevant dc to dc converter ics by searching "UC2525". 16 pins are present on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 18V. If you start a project, note down the dc dc regulator's usual output current of 100mA. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. 450kHz is the frequency of the switching controller. A dc switching in a dormant state uses 14mA. A nominal working status is achieved when the input voltage is set to 35V.
UC2525BDW Features
Transistor Driver Outputs
Switching Frequency: 100Hz~400kHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
UC2525BDW Applications
There are a lot of Texas Instruments UC2525BDW DC to DC converter applications.
- Power supplies of electronic gadgets
- Fire elevators
- Handheld GPS
- Electric heating, lighting
- CNC system
- Medical equipment
- Lathes
- Surface processing equipment
- Electrical power transmission
- Access control systems
