UC2525BN
| Parameters | |
|---|---|
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Frequency | 450kHz |
| Base Part Number | UC2525 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 19V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100Hz~400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 35V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
UC2525BN Overview
As a result of 16-DIP (0.300, 7.62mm) compact design, the switching controller is compatible with most applications. For 2 outputs, the dc motor controller is appropriate. The pmic is packaged in Tube solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 8V~35V. Worked in an dc switcher with a -40°C~85°C TA rating. The switching controller is capable of switching at the 100Hz~400kHz position. The Through Hole makes it ideal for general dc dc regulator. The dcdc regulator features Dead Time Control, Frequency Control, Ramp, Soft Start for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 20V. A search for "UC2525" will reveal other relevant dc to dc converter ics. Switching converter has a total of 16 pins. There is a particular type of Switching Regulator or Controllers in switching converter. DC regulator outputs 19V voltage based on test statistics. The dc dc regulator's usual output current is 100mA, which should be noted down when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. The switching controller works at a frequency of 450kHz. For nominal working status, the input voltage can be set as 35V.
UC2525BN Features
Transistor Driver Outputs
Switching Frequency: 100Hz~400kHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
UC2525BN Applications
There are a lot of Texas Instruments UC2525BN DC to DC converter applications.
- Product burn-in
- Experimental setup
- Emergency lighting monitoring equipment
- Current source circuits
- Bending machines
- Industrial controllers
- Smart grid
- Special machining machine tools
- Solar power plants
- Motor controller circuits
