UC2526ADW

18 Terminals 7V~35V 18-Pin UC2526 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 1Hz~600kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UC2526ADW
Package: 18-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 996
Description: 18 Terminals 7V~35V 18-Pin UC2526 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 1Hz~600kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	18-SOIC (0.295, 7.50mm Width)
Surface Mount	YES
Number of Pins	18
Operating Temperature	-25°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	18
Termination	SMD/SMT
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Max Power Dissipation	1W
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Frequency	450kHz
Base Part Number	UC2526
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	5.05V
Output Type	Transistor Driver
Max Output Current	200mA
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	100mA
Voltage - Supply (Vcc/Vdd)	7V~35V
Quiescent Current	14mA
Control Features	Enable, Frequency Control, Reset, Soft Start
Topology	Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
Control Mode	VOLTAGE-MODE
Frequency - Switching	1Hz~600kHz
Max Input Voltage	35V
Control Technique	PULSE WIDTH MODULATION
Rise Time	300ns
Synchronous Rectifier	Yes
Fall Time (Typ)	100 ns
Nominal Input Voltage	35V
Max Duty Cycle	50 %
Duty Cycle (Max)	49%
Output Phases	1
Height	2.65mm
Length	11.5mm
Width	7.5mm
Thickness	2.35mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UC2526ADW Overview

The switching controller fits in the 18-SOIC (0.295, 7.50mm Width) package and is ideal for most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 7V~35V. Workable in an dc switcher where -25°C~85°C TA is the -25°C~85°C TArm. The switching controller can be switched at 1Hz~600kHz. Surface Mount makes it suitable for general dc dc regulator. The dcdc regulator features Enable, Frequency Control, Reset, Soft Start for efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 18 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. You can find other relevant dc to dc converter ics by searching "UC2526". Total pins of switching converter are 18. In particular, switching converter is a type of Switching Regulator or Controllers. DC regulator outputs 5.05V voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 100mA, so note that when you start the project. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. Switching controllers operate at 450kHz frequencies. A dc switching in a dormant state uses 14mA. For nominal working status, the input voltage can be set as 35V. The maximum input voltage of the dc switcher is 35V, so users need to limit the voltage accordingly. DC switchers cannot produce output currents greater than 200mA.

UC2526ADW Features

Transistor Driver Outputs
Switching Frequency: 1Hz~600kHz
Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz