UC2572D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 300kHz |
| Base Part Number | UC2572 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | -70V |
| Output Type | Transistor Driver |
| Max Output Current | 500mA |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Negative |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 4.75V~30V |
| Quiescent Current | 9mA |
| Control Features | Current Limit, Ramp |
| Max Output Voltage | -1V |
| Topology | Flyback |
| Min Input Voltage | 4.2V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | -70V |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 92% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2572D Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC is packaged in a solid enclosure of Tube. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 4.75V~30V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. A switching controller such as this can switch at a value of 100kHz . The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Ramp which allows efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at DUAL . There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 5V. Search for "UC2572" to find other relevant dc to dc converter ics. Pins number 8 of switching converter in total. Test statistics indicate DC regulator outputs -70V voltage. It's important to remember that the dc dc regulator's normaloutput current is 500mA, so you should note it down when starting a new project. Switching controller operates at a frequency of 300kHz. DC switching uses 9mA when it is dormant. Because the dc switcher's maximum input voltage is 35V users must limit the voltage accordingly. There must be a 4.2V supply voltage. There will be 500mA output current greater than 500mA from the dc switcher. Its datasheet indicates the switching converter can output a maximum of -1V volts. There is -70V voltage output lower than -70V on the voltage controller.
UC2572D Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Ramp
PULSE WIDTH MODULATION
Frequency: 300kHz
UC2572D Applications
There are a lot of Texas Instruments UC2572D DC to DC converter applications.
- Pipe bending machines
- USB circuits
- Computer application technology
- Hydro power
- Computer rooms
- Communication system
- Emergency lighting monitoring equipment
- Analog precision reference circuits
- Printing
- Automatic testing equipment
