UC2573D
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | UC2573 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Max Output Current | 500mA |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 4.75V~30V |
| Quiescent Current | 9mA |
| Control Features | Current Limit, Ramp |
| Max Output Voltage | 30V |
| Topology | Buck |
| Min Input Voltage | 4.2V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.5V |
| Switcher Configuration | SINGLE |
| Max Frequency | 115kHz |
| Duty Cycle (Max) | 92% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
UC2573D Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tube rating. A total of Transistor Driver dc switching's outputs can be handled by it. DC control operates at 4.75V~30V volts and has 4.75V~30V supply voltage. Suitable for a -40°C~85°C TA dc switcher. There is a switch at 100kHz that can be used with this controller. dc dc regulator can be generalized using Surface Mount. The dcdc regulator features Current Limit, Ramp for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 8 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input of 5V. A search for "UC2573" will reveal other relevant dc to dc converter ics. Total pins of switching converter are 8. Statistically, the DC regulator outputs 30V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 500mA. There is a maximum frequency of 115kHz for this dc regulators. DC switching uses 9mA when it is dormant. The dc switcher's maximum input voltage is 35V; users must limit it accordingly. Voltage 4.2V is needed for the supply. In this case, the dc switcher won't produce more than 500mA watts of output current. At its maximum output, the switching converter can provide 30V volts. 1.5V voltage output is lower than 1.5V.
UC2573D Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Ramp
PULSE WIDTH MODULATION
UC2573D Applications
There are a lot of Texas Instruments UC2573D DC to DC converter applications.
- Wide-range voltage regulation circuits
- Scientific testing
- Computed tomography (CT)
- Direct power supply system
- Magnetohydrodynamic power
- Program control systems
- Handheld GPS
- Automatic testing equipment
- Thermal power
- Surface processing equipment
