UC2573DG4
| Parameters | |
|---|---|
| Min Output Voltage | 1.5V |
| Switcher Configuration | SINGLE |
| Max Frequency | 115kHz |
| Duty Cycle (Max) | 92% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | UC2573 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Max Output Current | 500mA |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 4.75V~30V |
| Quiescent Current | 9mA |
| Control Features | Current Limit, Ramp |
| Max Output Voltage | 30V |
| Topology | Buck |
| Min Input Voltage | 4.2V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
UC2573DG4 Overview
As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube is the solid enclosure in which PMIC is packaged. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 4.75V~30V. Qualified to work in an dc switcher with -40°C~85°C TA. In this switching controller, the switch can be set to 100kHz. dc dc regulator can be generalized using Surface Mount. The dcdc regulator features Current Limit, Ramp for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. DUAL are the position of the terminal of the switching converters. Different dc switching's functions can be applied to 8 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input of 5V. Searching "UC2573" will return other relevant dc to dc converter ics. The switching converter has a total of 8 pins. According to the test statistics, DC regulator outputs 30V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 500mA. DC regulator has a maximum frequency of 115kHz. In dormant mode, 9mA is used. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 35V. The supply voltage must be 4.2V. The dc switcher will not provide an output current greater than 500mA. A datasheet states that the switching converter can output 30V volts at its maximum. A voltage controller's lowest output voltage cannot be less than 1.5V.
UC2573DG4 Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Ramp
PULSE WIDTH MODULATION
UC2573DG4 Applications
There are a lot of Texas Instruments UC2573DG4 DC to DC converter applications.
- Household control circuits
- Terrestrial set-top boxes
- Nuclear power plants
- Geothermal power
- Flaw detection equipment
- Printing
- Wind power
- Domestic water pumps
- Game consoles
- Arc suppression circuits
