UC2573NG4
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | UC2573 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Max Output Current | 500mA |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 4.75V~30V |
| Quiescent Current | 9mA |
| Control Features | Current Limit, Ramp |
| Max Output Voltage | 30V |
| Topology | Buck |
| Min Input Voltage | 4.2V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 35V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.5V |
| Switcher Configuration | SINGLE |
| Max Frequency | 300kHz |
| Duty Cycle (Max) | 92% |
| Height | 4.57mm |
| Length | 9.81mm |
| Width | 6.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UC2573NG4 Overview
With its 8-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. For 1 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 4.75V~30V. Worked in a -40°C~85°C TA dc switcher before. The switching controller is capable of switching at the 100kHz position. The Through Hole value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit, Ramp. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of 8 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. You can find other relevant dc to dc converter ics by searching "UC2573". The switching converter has a total of 8 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. As determined by the test statistics, the output voltage of DC regulator is 30V. normally, the dc dc regulator's output current is 500mA, which you should keep in mind when starting a project. 300kHz is the maximum frequency of this dc regulators. Dormant dc switchings use 9mA. In order to ensure the dc switcher's functionality, users must limit the voltage to 35V due to the dc switcher's maximum input voltage. A voltage of 4.2V must be present in the supply. There will be 500mA output current greater than 500mA from the dc switcher. The datasheet indicates that the switching converter can output 30V volts at its maximum. voltage controllers with a minimum voltage output of 1.5V cannot operate.
UC2573NG4 Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Ramp
PULSE WIDTH MODULATION
UC2573NG4 Applications
There are a lot of Texas Instruments UC2573NG4 DC to DC converter applications.
- SMT equipment
- Flaw detection equipment
- Product burn-in
- Thermal power
- Medical monitoring systems
- Network technology
- seismic instrument power circuits
- Motor controller circuits
- Production lines
- Surface processing equipment
