UC2637N
| Parameters | |
|---|---|
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 8.5mA |
| Output Configuration | Pre-Driver - Half Bridge (4) |
| Output Current | 100mA |
| Collector Emitter Voltage (VCEO) | 36V |
| Max Collector Current | 100mA |
| Motor Type - AC, DC | Brushed DC |
| Height | 5.08mm |
| Length | 22.48mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 10 hours ago) |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 18 |
| Weight | 1.206102g |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES -2.5V TO -20V SUPPLY |
| Subcategory | Motion Control Electronics |
| Technology | BIPOLAR |
| Voltage - Supply | 2.5V~20V |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | UC2637 |
| Function | Controller - Commutation, Direction Management |
| Number of Outputs | 1 |
| Output Voltage | 13.5V |
| Max Output Current | 400mA |
| Supply Voltage-Max (Vsup) | 20V |
UC2637N Overview
This package was designed with Tubein mind.The part is packaged in a 18-DIP (0.300, 7.62mm) case.A mounting position of Through Holeis recommended for the part.Fits the component connected to General Purpose.There is a possibility of providing 2.5V~20Vvolts through the device.This device operates at a temperature of -25°C~85°C TA.The motor type can be classified as Brushed DC.The part supports 18terminations.You should run this amplifier at 15V.An analog IC with the model number BRUSH DC MOTOR CONTROLLERis employed in the device.The part number UC2637indicates that it is found.There are 18 pins on it.Drivers controllers belongs to the Motion Control Electronics series.There are a total of 1outputs available.13.5Vis maintained as the output voltage.This device offers a maximum degree of design flexibility due to its 100mAoutput current.Controller ic has also been assigned the characteristic [0].The maximum output current reaches 400mAto meet the operating requirements.
UC2637N Features
Applications : General Purpose
base on UC2637 number
designed with 1 outputs
Additional Feature: ALSO REQUIRES -2.5V TO -20V SUPPLY
UC2637N Applications
There are a lot of Texas Instruments UC2637N motor drivers applications.
- Display LED backlighting
- Large outdoor LED display
- Horticultural lighting
- Industrial lighting
- High brightness LED lighting
- Digital still cameras
- Camera-enabled smartphones
- Automotive exterior and interior lighting
- Large format LED backlighting
- Indicator circuit
